Description
LONGi
SolaX Triple Power T-BAT: high-voltage storage that grows with your home
SolaX Triple Power T-BAT is a modular, high-voltage battery system designed specifically for SolaX hybrid inverters. Instead of bolting a generic battery onto your solar system and hoping the two speak the same language, Triple Power is engineered as one integrated solution with the X1 and X3 hybrid inverter ranges — so charging, discharging, backup switching and monitoring all run through a single control platform.
High voltage, fewer losses
Triple Power runs at 102–460 V nominal instead of the 48 V used by older battery banks. Higher voltage means lower current for the same amount of power, which reduces conversion losses and internal heat. The result is a battery round-trip efficiency of around 95% — more of every kilowatt-hour you generate actually reaches your appliances instead of being lost along the way.
Safe LFP chemistry
Every module uses lithium iron phosphate (LFP / LiFePO₄) cells. LFP is the chemistry of choice for Australian conditions: it is thermally stable, has no toxic heavy metals or caustic materials, and holds up far better under heat than older lithium chemistries. The system carries international safety certification including CE, IEC 62619 and UN 38.3, with hardware-level secondary protection and a Class 9 hazardous materials classification for safe transport.
Two families, one platform
Triple Power 3.0 (T30) — a compact module at just 153 mm deep, ideal for tight garage walls. Build a tower of 3.1, 6.1, 9.2 or 12.3 kWh, or run two towers side by side with a BMS Parallel Box. A dedicated low-temperature heating function keeps it working through frosty mornings, and the stack mounts on the floor with a small footprint.
Triple Power 5.8 (T58) — the larger workhorse, available from 5.8 kWh up to 23 kWh in a single tower, and up to 34.6 kWh per cluster on the latest V3 generation. On inverters with two battery ports, two clusters can be combined for up to 69 kWh of storage. Choose floor or wall mounting. V3 units add aerosol fire suppression for precise, targeted protection.
Scalable by design
Start with the storage you need today and add modules later — no need to replace the whole bank when your household grows, you add an EV, or you want more blackout cover. Because the system uses one Master module with integrated Battery Management System (BMS) plus stackable Slave modules, expansion is a matter of adding capacity rather than starting over.
Smart management and monitoring
Remote fault diagnosis, over-the-air firmware upgrades and remote maintenance mean most issues can be identified and fixed without a site visit. Through SolaX Cloud you can watch solar generation, battery state of charge and household consumption in real time from your phone, so you can see exactly when your battery is earning its keep.
Built for Australian homes
Triple Power carries a 10-year product warranty and is rated for more than 6,000 charge cycles at 90% depth of discharge, with an end-of-life capacity guarantee of 70%. The enclosure is IP65-rated (IP66 on the T58 V3), so it is suitable for indoor installation and for sheltered outdoor locations that stay out of direct sun and weather.
Who it suits
Triple Power is the natural choice if you already run — or plan to run — a SolaX hybrid inverter, and you want one brand responsible for the whole system. It suits households chasing a bigger evening self-consumption rate, families wanting genuine blackout backup, and anyone who would rather add capacity in stages than commit to a single large upfront spend.
Talk to Solar Time Energy about sizing a Triple Power system for your roof, your usage pattern and your tariff. We design, supply and install across Brisbane, the Gold Coast and Ipswich.
Reviews
There are no reviews yet.